Array
(
[0] => Array
(
[id] => 2
[name] => 首页
[category_id] => 221
[url] =>
[active] => 1
[position] => 1
[blank] =>
[is_out] =>
)
[1] => Array
(
[id] => 4
[name] => 氿上商城
[category_id] => 221
[url] => goods
[active] => 1
[position] => 2
[blank] =>
[is_out] =>
)
[2] => Array
(
[id] => 1
[name] => 学习园地
[category_id] => 221
[url] => news
[active] => 1
[position] => 5
[blank] =>
[is_out] =>
)
[3] => Array
(
[id] => 16
[name] => 氿上知道
[category_id] => 221
[url] => question
[active] => 1
[position] => 4
[blank] =>
[is_out] =>
)
[4] => Array
(
[id] => 5
[name] => 供求信息
[category_id] => 221
[url] => trade
[active] => 1
[position] => 3
[blank] =>
[is_out] =>
)
[5] => Array
(
[id] => 3
[name] => 软件下载
[category_id] => 221
[url] => jsyjj/list/409
[active] => 1
[position] => 6
[blank] =>
[is_out] =>
)
[6] => Array
(
[id] => 46
[name] => 氿上云管理
[category_id] => 221
[url] => yun/index
[active] => 1
[position] => 7
[blank] =>
[is_out] =>
)
[7] => Array
(
[id] => 22
[name] => 氿上花园
[category_id] => 221
[url] => garden
[active] => 1
[position] => 999
[blank] =>
[is_out] =>
)
)
配电箱在剪力墙上如何预埋，以后配管好配吗？ - 工程设计 - 项目管理 - 氿上知道
返回顶部
⑵、审核电气施工图，核对配电系统图的设计参数符合规范要求，同时应满足实际使用功能要求，不留用电安全隐患；
⑶、协调并落实落实配电箱的供货模式，跟踪配电箱供货：
a、配电箱甲供：工程部应提前提交供货计划，而且应分别明确箱体和盘芯的供货时间要求；
b、配电箱甲定乙供：工程部应提前督促施工单位和厂家签订采购合同；
⑷、箱体安装前，工程部应及时联系厂家，确定配电箱的规格大小，并要求厂家提供样品，以便于土建墙体砌筑过程中预留安装洞口和核实配电箱的电线管排布，发现问题及时联系厂家进行调整，避免大量返工和浪费；
⑸、墙体砌筑过程中应要求监理督促施工单位预留配电箱的安装洞口和顶部过梁，以及在过梁上预留电线管安装孔洞，避免后续凿打墙体和过梁，破坏二次结构；
⑹、箱体配管连接：开孔应采用开孔器，一管一孔，间距排布均匀，且不小于15mm；
⑺、箱体预埋时，箱盖板不能安装，统一保管并保护表面避免损坏；
⑻、箱体和盘芯安装后应要求监理督促施工单位做好成品保护措施和防盗措施。